What a Water Label Can't Tell You (and When to Get Water Tested)
The mineral table on a bottle is one of the most useful things on the label. It tells you how much calcium, magnesium, sodium and other minerals the water typically contains. But it is easy to read more into those numbers than they can tell you. Here are the limits, and what to do if you have genuine concerns about a water.
The figures are typical, not a guarantee for every bottle
The numbers come from a laboratory analysis of the source. Natural waters vary a little over time and between boreholes, so the label shows representative values rather than an exact measurement of the bottle in your hand.
Ascend is a good example. Accredited laboratory reports on its three source boreholes show dry residue between 42 and 50 mg/L and sodium between 6.4 and 7.0 mg/L. Small variations like this are normal.
A mineral table does not show microbiological quality
The label tells you about dissolved minerals, not about bacteria. Microbiological safety is controlled by the bottling rules and by producers' own testing at the source and in the bottling plant, not by anything printed in the mineral table.
It does not list everything that has been tested
A natural mineral water label must show its characteristic constituents, the minerals that define it. It does not list every substance the producer tests for. Limits on contaminants are set by law, and producers must meet them whether or not they appear on the label.
Home testers can be misleading
Cheap pH strips and handheld TDS (total dissolved solids) meters are popular, but they measure very little:
A TDS meter measures electrical conductivity, which rises with dissolved minerals. A high reading usually just means a mineral-rich water, not a contaminated one, and a low reading does not prove a water is safe.
Neither a TDS meter nor a pH strip can detect bacteria, lead, pesticides or most other contaminants.
When a laboratory test makes sense
Private water supplies: if your home is on a private well or borehole, your local council has a role in checking private supplies, and a test at a UKAS-accredited laboratory is the reliable way to find out what is in it.
Old pipework: if you live in an older property and are worried about lead pipes, contact your water company, which can advise and may test your tap water.
A change in taste, smell or colour: for mains water, contact your water company first.
A concern about a bottled product: contact the producer, and if needed your local authority's food safety team.
What the label is good for
Used for what it is, the mineral table is a great tool. It lets you compare how light or rich a water is, check sodium if you are watching your salt intake, and estimate hardness from calcium and magnesium. Our guide to reading a mineral water label walks through each line, and our mineral water comparison puts 11 brands side by side.




Comments